Hi, is it possible to create an action with Govee or Nanoleaf? It works perfectly with Philips Hue LEDs. Or could it be done via Home Assistant?

Edited January 8Jan 8 by acid303

Yes, I think. They both work with Home Assistant, and PreShow can send commands to Home Assistant.

That being said, I've only set up HA for some testing and don't think I still have it set up. I have some Nanoleaf lights, but they aren't in my theater, and I don't own any Govee lights. In other words, I don't really have much info that I can share on how to actually set them up with PreShow.

I'm going to be working on the guides later this year and may be able to offer more insight then.

Thank you for the feedback. It would be great if Govee could work with PSE and Home Assistant, as I also have Govee installed in my home theater. My goal is for all the lighting to turn off when the movie starts and back on when it ends.

Here's a page on using Govee lights in Home Assistant:
https://www.home-assistant.io/integrations/govee_light_local/

And here's a page about LAN API control:
https://app-h5.govee.com/user-manual/wlan-guide

Hi, I've looked at it. Thanks for that. I found another solution using WLED. However, I can't get the light to dim slowly and turn off after 30 seconds. Here's the command, in case you don't already know it. "http://IP LED/win&T=0" This turns the light off completely. If you then replace the 0 with 1, it turns back on. I speak German. Hope that's understandable.

I got it working. Here's an example with 30-second dimming and a brightness of 50% via WLED at

"http://IP WLED/win&A=50&TT=30000" and then off at "http://IP WLED/win&A=0&TT=30000"

Edited January 13Jan 13 by acid303

I don't know anything at all about WLED and have no way to test it, but looking at the api I think the following may work.

"http://IP LED/win&A=0&TT=30000"