Support

Hello, I have migrated from CV running on Matrix to Omega. I have everything setup, but for some reason if the Trivia module is active in the sequence, the sequence will not play, and only a black screen is displayed. I checked the KODI log but nothing looks wrong. I am using the trivia files migrated over from CV, so I am assuming those are compatible? thx

How can I use the PSE Addon with the Kodi Remote app on my iPad, because I would like to turn my iPad into a control Center for my HomeCinema. Thanks

Hi! Long time fan of PSE and started using it on my Zidoo, but every time I create a sequence, I am not able to correctly use the action files i downloaded here to disable the Zidoo file before my sequence starts and enable it before my feature starts. Can someone show me the way to make something like this happen? I would like to play at least my feature using the Zidoo native player. Thanks!

Hi Matt, seems finally I was able to solve my random skipping issues like discussed here: https://preshowexperience.com/forums/topic/1913-feature-is-being-skipped/#findComment-2902 I disabled “allow skipping” in PSE settings. So far so good! Now I have the next issue. I am using external player in Kodi for windows. Kodi launches MPC-HC to play a file. Now it seems when starting the feature from PSE playback in external player stops after some seconds. Could it be that PSE does not get the current playback status from Kodi? Please find a debug log attached. Movie starts on line 5783. In line 5853 I can see: PSE: Fullscreen Video Closed. Can I get you to have a look? Ma…

Trivia not showing on PSE - plays intro then outro videos but skips the images of the Trivia. I downloaded the different packs from PSE site. I made sure that the packs are under the Trivia folder. I noticed that the file naming is not the same between each pack. I tried different packs and none worked. I then changed the naming to follow the instructions Filename requirements Question images must end with _q. Answer images must end with _a. Clue images must end with _c(#1-9). Fact images can't end with q, a, or _c#. And that did not work either. What can I try next? Thanks

Hi all, as the title says really. I try and save and nothing happens, when I check the file list it's only got the defaults listed and if I load them it goes back to what it was. I have tried save as but get the same issue, nothing seems to save anywhere? Can I specify a directory, do I need to give some permissions somewhere?

The feature is automatically skipped after 6 seconds. Not sure why this is happening.

Hi, first time user. A problem with initial setup. When selecting content path I get the error "Make sure the selected folder is writable and that the new folder name is valid". I'm on the latest Nvidia Shield TV Pro. External SSD and the path is within a root folder named NVIDIA_SHIELD (as can be required for some scenarios on the Shield). Tried other folders on the SSD without luck. The SSD works fine with other apps like VLC and Plex. Tried downgrading to 0.3.0. Same result. Any suggestion?

@Matt: Hi, Matt! There is a modified Confluence-Skin for Kodi 20... can you tell or show me, where you've changed it for turning off the "Busy"-indicator? Background: I'm using Xonfluence because of its possibilities to change the menues. And I would like to modify it, too (as maybe you would like to modify it quickly ;-) ?) -- Thank you so much! -- Robert

Hi. I can't seem to get the latest version to work. I have installed the Matt Huisman Youtube for Trailers addon but I get the following error in the Kodi log: Seems a 'Quality' attribute is missing?? Any help much appreciated. Thanks

Hi, is it possible for a curtain to open and the Movie to start immediately in a transition?

I’ve completely uninstalled PreShow Experience and reinstalled. I’ve made sure the Youtube plugin is installed. I’ve enabled all sources and ran content updates several times. I start with a new blank sequence, put in a trailers module - set it to 3 trailers. Do a “preview” - it turns the screen black and then returns. I’ve uninstalled and reinstalled the Youtube plugin as well. I’m out of ideas unless someone can tell me that this is just broken for now?

Hello, I have several films with chapter markers and have activated the action: "dim the lights up" at the last chapter, but unfortunately it hasn't worked with any film so far. The action function during general playback with PSE works perfectly. I use a ShieldTV with Kodi Omega. Is there any way to get this function to work or do I have to set something up beforehand? Thank you in advance.

Thank you so much for the Confluence skin in Kodi 21! As I've changed from 20 to 21, the old Confluence didn't work any more... One thing left: Maybe I'm to silly... What's my fault, when I can't set up my background image? I'm using XBMC 21 on my Zidoo instead of pure Kodi 21. When I go to "-Configure skin..." > "Background" > "-Background path:" I do see External storage and my HDD connected to my Zidoo. But the only path in which I can switch is "Root filesystem". Of course, my background image I've put to the HDD. It's not accessible from there... How can I get to my picture? Or: How can I put the picture somewhere into the Root filesystem? I don't find it us…

First off - thanks for this great contribution to the kodi eco-sphere. I only have one issue. I notice that for some of the modules in my sequence (e.g. a folder of theatrical prevues) - they play at 60% volume. In every area I can change the volume--in the setup, but also in the sequence editor setting for the associated module--it is set to 100%. But upon playback I can see it's at 60%. Another module (trailers) plays as expected. And then when the film itself plays, the volume returns to where Kodi was previously set at. I tried digging right into the .seq file I exported, and also the files in addon_data but don't see where it's pulling these volume changes. Any idea…

Hi, mybe my last post was gone (iI cannot find it) I still wants to show up that I got an Alert on your page. Infizierte Webseite gefunden Gestern um 9:55 Uhr Funktion: Online-Gefahrenabwehr Wir haben diese gefährliche Seite zu Ihrem Schutz blockiert: root_library.js Name der Bedrohung: GT:JS.Acsogenixx.673.EE6DC3AB Gefährliche Seiten versuchen, Software zu installieren, die dem Gerät schaden, personenbezogene Daten sammeln oder ohne Ihre Zustimmung aktiv werden kann Can you please explain why this is shown up? Ort fix it? Thx BananenTV

Is there a way to pick Scope/Flat bumpers and other intros based on screen ratio or aspect ratio?

It's been a while since I selected Trailers in the Movie, Information (context menu) option. Today when selecting the Trailer icon, I got a dialog to Add-on YouTube. Then the Installation fails. Tried from the repository, and it failed too. How do I view trailers via this icon in the Information? I can view Trailers with IMDB Add-on, but I like the convenience when selecting the Movie, then using Information from the context menu (simple from my remote control).

hi, I would like to install a sleep function in the cvaction. How does this work? The light should stay on for e.g. 3 minutes and then slowly go out I've tried it before but somehow it doesn't work. See pictures. Thanks. # Philips Hue: Licht ausschalten sleep://3500 http://192.168.178.33/api/wsltUbHQbdnDhDEidaNJQg2s85Nv9OldLPE6TYeT/groups/Wand/action PUT: { "on": false, "transitiontime": 500 }

Would it be possible for PSE to scrape Kodi video sources for local trailers, instead of relying on the trailer folder in the content path? Over the years, I accumulated dozens of movie trailers with uncompressed HD audio that are saved in the corresponding movie folders, e.g.: Dune Part Two (2024) Dune Part Two (2024)-trailer Kodi automatically picks these up when I play trailers from the movie information screen. It would be awesome if I could tap into my existing collection without needing to manually copy them into the content path, also considering that doing so would double my storage requirements.

Hi, first and foremost thank you for the work are you doing to support with project. I was wondering if there is a way to have a movie resume from the Kodi resume point with PSE? Whenever I use PSE it always starts the movie from the beginning. Am I missing something? Thanks

Hi, I am still struggling with the DialogBusy loading icon. Thats why I wanted to ask explicitly, if anyone who uses a Shield could manage to make it invisible. I had no problem when Kodi was installed on a PC. Now that I use a Shield and Arctic Zephyr reloaded. I acces the shield via network connection, open "internal/Android/data/org.xbmc.kodi/files/.kodi/addons/skin.arctic.zephyr/1080i and then I edit the DialogBusy and the CustomDialogBusy files. But even if I edit it to visible>false</visible, the loading icon remains there. (This works when Kodi is installed on a PC). Has anyone an idea what I am doing wrong?

help with sequence. I created two sequences. But when I try to take the second sequence it jumps to the first sequence every time. what could be the reason?